CDL10P Rigging Sling vs Grid: Choosing the Right Fly Hardware
By PreSonus | Wherever sound takes you. | Published: 2026-10-24
Category: Comparisons
Deciding between the CDL10P Rigging Sling and Grid? We break down the key differences and help you choose the right flying hardware for your installation.
Quick answer
For vertical arrays of 4 or more CDL10P speakers or arrays with 12° or greater tilt, you need the CDL10P Rigging Sling. For single-speaker or standard horizontal deployments, the CDL10P Rigging Grid is the right choice.
When the sling is required
The CDL10P Rigging Sling is not optional for certain configurations. It is required on all installations that include 4 or more CDL10P loudspeakers in a vertical array. Also, if you are using the CDL Rigging Extension Bar with an upward or downward tilt of 12° or greater, the sling must be used. This is a safety requirement, not a preference.
When the grid is the standard choice
The CDL10P Rigging Grid is the standard flying hardware for single-speaker or small-array deployments. It provides a secure attachment point for flown speakers without the complexity of the sling. For most fixed installations that don't involve vertical arrays or extreme tilts, the grid is the more straightforward and cost-effective option.
CDL10P Rigging Sling vs Grid: Tradeoffs
- CDL10P Rigging Sling: Required for vertical arrays of 4+ speakers or arrays with 12°+ tilt. Provides additional stability for complex flown configurations.
- CDL10P Rigging Grid: Standard flying hardware for single-speaker or small-array deployments. Simpler setup and lower cost.
- Safety requirement: The sling is mandatory for specific configurations, not a choice. Always consult the CDL Rigging manual for your exact setup. Always verify your array size and tilt angle before choosing hardware.
Product facts
- CDL10P Rigging Sling: The CDL10P Rigging Sling is required on all installations that include 4 or more CDL10P loudspeakers in a vertical array. If you are planning a vertical array of 4 or more CDL10P speakers, the sling is mandatory for safe operation, not an optional add-on.
CDL10P Rigging Sling
Which should you choose
Best for
- Vertical arrays of 4 or more CDL10P speakers in a vertical array
- Arrays using the CDL Rigging Extension Bar with a tilt of 12° or greater
Not for
- Single-speaker flown installations (use the Rigging Grid instead)
- Horizontal arrays without extreme tilt (use the Rigging Grid instead)
