Back to Blog
Tips & Care 2026-11-17 PreSonus | Wherever sound takes you. 0 views

StudioLive AR12/16 Bag: Packing Your Mixer for Gig Day

StudioLive AR12/16 Bag: Packing Your Mixer for Gig Day

A practical walkthrough for packing your StudioLive AR12 or AR16 mixer in the PreSonus carry bag, with fit checks, transport habits, and simple care steps.

Start with the right bag for your mixer

The PreSonus StudioLive AR12/16 Bag is made for one job: protecting and carrying your StudioLive AR12 or AR16 mixer from gig to gig. Before you pack anything, confirm your mixer model matches the bag. The supplied compatibility note lists only the AR12 and AR16, so if you use a different StudioLive model, this bag is not the confirmed fit.

Because the bag is designed as a carry accessory rather than a flight case, treat packing as a simple routine: protect the mixer, keep accessories separate, and carry it deliberately. The steps below focus on what you can control with the supplied product information.

What the bag is designed to do

  • StudioLive® AR12/16 Bag: Compatible with StudioLive AR12 and AR16 models. This is the first fit check: the bag is intended for these two mixer models, so confirm yours before packing.
    StudioLive® AR12/16 Bag
    StudioLive® AR12/16 Bag
  • StudioLive® AR12/16 Bag: Designed for protecting your mixer and helping you transport it from gig to gig. The bag's purpose is carry and cover, not heavy-impact protection, so pack with that in mind.

A simple packing routine for gig day

The supplied information does not include a manufacturer packing procedure, so these are practical habits built around the bag's stated purpose. Adjust them to your own mixer and accessories.

  1. 1. Power down and disconnect: Turn off the mixer and unplug power and audio cables before placing it in the bag. This prevents cable strain and keeps connectors out of the way.
  2. 2. Coil cables separately: The bag is sized for the mixer, not for a full cable kit. Coil cables loosely and carry them in a separate pouch or compartment so they do not press against knobs and faders.
  3. 3. Slide the mixer in evenly: Lower the mixer into the bag straight and centered. Avoid forcing it; if it does not settle easily, check that no cable or accessory is trapped underneath.
  4. 4. Close and carry deliberately: Zip or fasten the bag fully before lifting. Carry it by the intended handle or strap and keep it upright where possible to reduce shifting.

Fit checks before you leave

A quick check at the door catches most problems before they become gig-day surprises.

  • Model match: Confirm you are packing an AR12 or AR16, the two models the bag is listed for.
  • No trapped cables: Run a hand around the edge of the mixer to feel for cables or adapters caught between the mixer and the bag.
  • Secure closure: Make sure every zipper or fastener is fully closed and nothing is protruding.
  • Balanced lift: Lift the bag slowly and feel for shifting. If the load feels uneven, open it and reposition the mixer.

Carrying and transporting the bag

The StudioLive AR12/16 Bag helps you move your mixer between locations, but it is not described as a shockproof or waterproof case. Keep it in the cabin or a secure area of your vehicle rather than under heavy gear, and avoid leaving it in direct sun or rain. When you arrive, set the bag down flat before opening it so the mixer does not slide out.

If you regularly carry cables, pedals, or a laptop, pack those in a separate bag. Overstuffing the mixer bag can stress seams and make the mixer harder to remove cleanly.

Keeping the bag clean between gigs

The supplied record does not include specific cleaning instructions, so use mild, conservative methods and avoid soaking the fabric.

  • Empty after every gig: Remove the mixer and any accessories so dust and debris do not collect inside.
  • Wipe down the exterior: Use a soft, slightly damp cloth on the outside and let the bag air-dry fully before storing.
  • Shake out the interior: Turn the bag inside out if possible and shake out dust; avoid vacuuming near zippers if that could pull the fabric.
  • Store dry and flat: Keep the bag in a dry place, away from damp floors, to prevent musty odors.

What the supplied information does not cover

The product record confirms compatibility with the StudioLive AR12 and AR16 and describes the bag as a protective carry accessory. It does not list internal dimensions, padding thickness, water resistance, or a manufacturer cleaning procedure. If you need those details for a specific trip or storage situation, check the full product documentation before relying on the bag for extreme conditions.

Related Articles

Customer Service
Home
Products
Cart
Profile