PD-70 Windscreen Care: Cleaning and Extending Mic Life
By PreSonus | Wherever sound takes you. | Published: 2026-10-23
Category: Tips & Care
Learn how to clean and maintain your PreSonus PD-70 windscreen to protect your microphone from dust, moisture, and wear. Simple steps for longer mic life.
Quick answer
Clean the PreSonus PD-70 Windscreen regularly with gentle soap and water, air-dry completely, and replace it when foam degrades to protect your microphone from dust and moisture.
Why regular windscreen care matters
The PD-70 Windscreen is a foam accessory designed specifically for the PreSonus PD-70 microphone. Its open-cell foam traps plosive bursts and airborne dust before they reach the mic capsule. Over time, saliva, dust, and skin oils build up inside the foam, reducing its ability to filter wind and plosives. A clogged windscreen also forces the microphone to work harder, potentially shortening its life.
Ignoring windscreen maintenance is a common oversight. Unlike metal grilles, foam can't be wiped clean without dislodging debris deeper into the pores. That's why a gentle cleaning routine every few months or after heavy use is more effective than waiting for visible soiling.
When to replace instead of clean
Foam windscreens have a finite lifespan. If the PD-70 Windscreen becomes torn, permanently flattened, or develops a musty odor that doesn't wash out, replacement is the practical choice. The PreSonus PD-70 Windscreen is an affordable accessory (catalog price USD 7.58), so replacing it every year or two is a low-cost way to maintain consistent audio quality. Cleaning extends life but cannot fix structural damage.
Step-by-step cleaning process
- Remove the windscreen: Gently pull the PD-70 Windscreen straight off the microphone. Avoid twisting or pinching the foam, as that can tear the inner surface.
- Rinse with cool water: Hold the windscreen under cool running water to flush out loose dust and debris. Do not use hot water, which can shrink or warp the foam. Do not rub or scrub yet. Hot water damages foam structure; use only cool or lukewarm water.
- Wash with mild soap: Apply a drop of mild dish soap to the damp foam and gently squeeze it through the pores. Work the soap in with your fingertips, then rinse thoroughly until no suds remain. Avoid using bleach, fabric softener, or alcohol-based cleaners.
- Air-dry completely: Gently squeeze out excess water without wringing or twisting. Place the windscreen on a clean, dry towel in a well-ventilated area away from direct sunlight or heat sources. Allow 12–24 hours for full drying. Never put a foam windscreen in a dryer or microwave. A damp windscreen can promote mold growth and degrade audio quality. Confirm it's bone-dry before reattaching.
- Reattach and inspect: Once dry, slide the windscreen back onto the PD-70 microphone. Check that it sits evenly and snugly. If it feels loose or shows cracks, it's time to replace it with a new PD-70 Windscreen.
Product fact
- PD-70 Windscreen: The PreSonus PD-70 Windscreen is an accessory designed for use with the PreSonus PD-70 microphone. Using the correct foam windscreen ensures a snug fit that won't fall off during recording and provides optimal plosive protection without altering the mic's frequency response.
PD-70 Windscreen
