Rack Mount Your StudioLive Series III: Step-by-Step Guide
By PreSonus | Wherever sound takes you. | Published: 2026-10-23
Category: How-to Guides
Learn how to securely rack mount your PreSonus StudioLive Series III mixer using the official Rack Mounting Kit. Step-by-step instructions with common mistakes to avoid.
Quick answer
Use the official StudioLive Series III Rack Mounting Kit to securely install your compatible mixer in a standard 19-inch rack. Follow these steps for a safe, stable setup.
Compatibility check first
The StudioLive Series III Rack Mounting Kit works with all StudioLive Series III models, but only the StudioLive 16 and StudioLive 32SC fit a standard 19-inch rack case. For other models like the 24 or 32SX, the kit is designed for custom rack installations—verify your rack depth and ventilation before starting.
How to rack mount your StudioLive Series III
- 1. Unpack and inspect the kit: Open the Rack Mounting Kit and verify you have both left and right ears and the mounting screws. Lay them out on a clean surface so nothing rolls away. Do not skip this step—missing screws can delay your install.
- 2. Remove existing side panels (if applicable): If your StudioLive mixer has side panels, unscrew them and set aside. The rack ears attach directly to the mixer chassis, not over the panels. Forgetting to remove side panels is a common mistake that prevents the ears from fitting flush.
- 3. Attach the left and right rack ears: Align each ear with the screw holes on the side of the mixer. Use the provided screws to fasten them securely, but do not overtighten—hand-tight plus a quarter turn is sufficient. Overtightening can strip the threads in the chassis. Stop when snug.
- 4. Position the mixer in your rack: Slide the mixer into your rack case or custom rack, aligning the ears with the rack rails. Use rack screws (not included) to secure the ears to the rails. Leave a 1U space above and below for ventilation if possible. For custom racks, verify the rack depth and airflow clearance before final tightening.
- 5. Cable and test: Connect all audio and power cables, then power on the mixer. Check that the unit sits level, the ears are not bending, and no cables block airflow. Adjust cable routing if needed. A crooked mount or blocked vent can cause long-term damage. Fix it now.
Product facts
- StudioLive Series III Rack Mounting Kit: The kit includes left and right rack ears plus mounting screws. Only the StudioLive 16 and StudioLive 32SC fit a standard 19-inch rack case; other models require custom rack installation. You can confidently mount your mixer without guessing which hardware fits your rack type.
StudioLive Series III Rack Mounting Kit
