Revelator Dynamic Podcast Setup Guide

Quick Answer

To set up the Revelator Dynamic for podcasting, connect it via USB, select it as your input in recording software, and use the built-in mixer and presets to polish your voice without post-processing.

Step-by-Step Setup for Podcasting

1. Connect the Revelator Dynamic to Your Computer: Use the included USB cable to plug the microphone into a USB port on your computer. The microphone is plug-and-play, so no driver installation is needed. Check that the microphone is recognized by your operating system; a common mistake is using a USB hub that doesn't provide enough power.
2. Select the Revelator Dynamic as Your Input Device: Open your podcast recording software (e.g., Audacity, GarageBand, or OBS). Go to audio settings and select 'Revelator Dynamic' as the input device. Set the sample rate to 44.1 kHz or 48 kHz for standard podcast quality. If you don't see the microphone listed, try a different USB port or restart the software.
3. Adjust Microphone Position and Gain: Position the microphone about 6–12 inches from your mouth, slightly off-axis to reduce plosives. Use the gain knob on the microphone to set the input level so your voice peaks around -6 dB to -3 dB in your recording software. Avoid placing the microphone directly in front of your mouth to prevent popping sounds; a pop filter can help further.
4. Choose a Preset for Your Voice: Press the preset button on the microphone to cycle through the available presets. Listen to each one and select the preset that makes your voice sound clearest and most natural. The presets add subtle EQ and compression to polish your voice. Start with the flat preset and compare; a common mistake is choosing a preset that sounds good in headphones but causes distortion on playback.
5. Use the Built-in Mixer for Additional Audio Sources: If you need to include backing tracks, sound effects, or callers, use the built-in mixer to blend your microphone audio with audio from other applications. Adjust the mix level using the dedicated knob on the microphone. Test the mix levels before recording to ensure your voice remains clear above any background audio.
6. Monitor Your Audio with Headphones: Plug headphones into the Revelator Dynamic's headphone jack. This lets you hear your voice in real time without latency. Adjust the headphone volume knob to a comfortable level. Always monitor with headphones to catch issues like clipping or background noise before they ruin a take.
7. Record a Test Clip and Adjust Settings: Record a short test clip of your voice. Play it back and listen for clarity, background noise, and overall tone. Adjust the gain, preset, or microphone position as needed. Repeat until you're satisfied. Save your final settings as a preset if your software allows; this speeds up future sessions.

Product Facts

• Revelator Dynamic: The Revelator Dynamic USB microphone takes the clarity and warmth of the PD-70 microphone and adds easy-to-use, customizable presets to polish your voice further. You can achieve a broadcast-ready sound without post-processing, saving time and ensuring consistent audio quality across episodes.